17 not categorized PORSCHE 924S FIBER GLASSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1978-83 (includes uncategorized and accessory items) 220512964GFK
$4,067.80
Make a selection GT030C If you wish to lighten up your 911, these fender fit the bill. Made of fiberglass, they replace the heavier factory steel fenders. Sold as a pair, these fenders weigh 6 pounds each (factory fenders weigh in at 28 pounds left, 25 pounds right respectively) with rear air exits, no gas bucket. General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89
$1,099.00
Make a selection FVD512996053R02 Ware ist ohne befestigung, locher mussen selber gebohrt werden. Keine 1. Klassige oberflache, mussen nochmal lackiert werden.
$1,615.87
Make a selection GT019A Another easy way to shed pounds from your 911. These light weight reproduction doors fit '65 through '98 model years (911 through 993). The inside of this door mimics the steel insides of the stock door and includes indents for the electric regulators, switches etc. These doors accept the stock door panel, window frame and window. Requires top and bottom door hinges (part number rgt020). Doors sold in pairs. Average weight 10 lbs each. General Fitment911 1974-77911 1978-83 911 1987-89 911 1984-86 930 1975-77
$1,950.00
Make a selection GT030 Porsche 911 "driver side" stock narrow body complete front fender with the headlight bucket, closing / vertical mounting flange and the gas bucket for stock builds or retaining original gas filler. This GT racing front Porsche 911 fender fits stock 911 front bumpers or GT racing part #43 and #43d. average weight 8 lbs. original part weight approximately 28 lbs. Each side. General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
$550.00
Make a selection GT035125 These are complete quarter panels that cover from the door to the engine lid. They allow the use of wider rear wheels. 12.5 inches wide. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89
$670.92
Make a selection GT024 If you’re serious about lightening up your 911, you need to start with a lightweight hood. This fiberglass hood replaces the steel factory piece and weighs in at a feathery 12 pounds (the factory on weighs 42 pounds). Hood has a finished underside and bolts up to the factory hinges. Since it’s made of fiberglass, it will not dent or corrode like the expensive factory metal hood. General Fitment911 1974-77911 1987-89 911 1984-86 930 1975-77 911 1978-83 911 1989-94 911 1994-98
$870.00
Make a selection GT020B These hinges are mounted on the body and are required when adding fiberglass doors to your 911 (part number rgt019a). Crafted from high quality billet aluminum. Sold/priced in pairs, one pair needed per side. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1994-98 911 1989-94 911 1965-69 911 1970-73
$115.00
Make a selection GT0359 These are complete fiberglass quarter panels that cover from the door to the engine lid. They allow the use of wider rear wheels. Inches wide. General Fitment911 1974-77911 1987-89 911 1984-86 911 1978-83 930 1975-77
$714.12
Make a selection GT020 These hinges are mounted on the door and are required when adding fiberglass doors to your 911 (part number rgt019a). Crafted from high quality billet aluminum. Sold/priced in pairs, one pair per door. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1994-98 911 1989-94 911 1965-69 911 1970-73
$115.00
Make a selection GT040 These are complete quarter panels that cover from the door to the engine lid. They allow the use of wider rear wheels and have front and rear exits. 14 inches wide. Fiberglass vent boxes sold separately. General Fitment911 1974-77911 1987-89 911 1984-86 911 1978-83 930 1975-77
$649.32
Make a selection GT036 If you want the ultra wide-body looks and light weight, we offer these fiberglass "rs" flares for the rear of your 911. These flares are 9" wide. General Fitment911 1974-77911 1987-89 911 1984-86 911 1978-83 930 1975-77
$374.30
Make a selection GT034 For those out there with very wide beyond factory flared fenders or using GT racing turbo flared fiberglass fenders, these turbo rocker panels are the finishing touch. They tie the front and rear fenders together and add the appearance of width to your Porsche. For 11 and 14 inch wheels. General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89 911 1974-77
$376.00
Make a selection 100731101 High quality, German made reproductions of the factory rennsport mirrors. Made of ultra-light glass fiber komposite. The glass can be adjusted.
$730.40
Make a selection GT03511 These are complete quarter panels that cover from the door to the engine lid. They allow the use of wider rear wheels. 11 inches wide. General Fitment911 1974-77930 1975-77 911 1984-86 911 1978-83 911 1987-89
$714.12
Make a selection GT10 Another useful way to lighten up your 911. This fiberglass rear engine cover replaces your stock metal lid and accepts the stock air vent. Weighs a fraction of the factory part. Black plastic grille sold separately or reuse your own. General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89 911 1970-73 911 1965-69
$779.99
Make a selection QRS001 This fiberglass engine shroud is a great replacement for your missing or cracked factory piece. Note: this does not have the oil cooler duct; may not work with some models. Make sure to examine your existing shroud before ordering. This is a special order part. General Fitment911 1974-77930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$689.00
Make a selection GT033 For those out there with stock turbo wide flared fenders or using GT racing turbo flared fiberglass fenders, these turbo rocker panels are the finishing touch. They tie the front and rear fenders together and add the appearance of width to your Porsche. For cars with 9 and 11 inch wheels. General Fitment930 1975-77911 1978-83 911 1984-86 911 1987-89
$470.00
Make a selection GT030P Porsche 911 "passenger" stock narrow body complete front fender with the headlight bucket, closing / vertical mounting flange. This GT racing front Porsche 911 fender fits stock 911 front bumpers or GT racing part #43 and #43d. average weight 8 lbs. original part weight approximately 19 lbs. Each side. General Fitment911 1974-77911 1978-83 911 1984-86 911 1987-89
$500.00
Make a selection 9145031256GT No need now to use fiberglass rocker panels on your GT conversion with our new GT steel rocker panel ends. Easily welded on, these ends are a perfect match to our GT flares and can be welded to our new steel rocker panels or to your original metal ones. Price is for four pieces. These are special order and may not be in stock, please call to inquire about lead time.
$312.70
Make a selection FVD504993RS Made of polyurethane so they will not chip or crack like fiberglass, and are flexible enough to survive small impacts. Simple installation without any modifications to the original bodywork. Sold as a set (left and right). Not for wide body cars (993 turbo or turbo-look). Please note: these are aftermarket products. All aftermarket products need to be prepped, sanded, gaps checked / filled and painted. We only recommend professional installation with a shop that has aftermarket bodywork experience.
$696.30
Make a selection 914301GT For 7” and 9” flares.
$229.00
Make a selection 330930103R02 If you are looking to replace a damaged strosek kit or update your car with a strosek kit, we have it. This is made with lightweight gfk / grp (glass fiber komposite / glass reinforced plastic). Sold as a set. 1 needed per car. Please note: this does not include door sills. Ohne turleisten
$726.00
Make a selection 98650499401G2X Speedster covers add a more aerodynamic look to your Boxster. Made of molded fiberglass. Installation hardware included. Easily removable.
$1,915.91
Make a selection 071280630 Seat shell consisting of glass fiber reinforced plastic gfk, weight approx. 22 lbs (10,0 kg), shock absorbing foam, special belt slot for hans-systems, belt slot for 4-, 5- or 6- point-belt, head protector, friction grip surface in shoulder and seating area, hans protection, inflammable resisisting cover materials General FitmentALL
From $1,694.94
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |